1.The machine is mainly used in the beverage filling operations. The four functions of bottle sterilize,wash, fill and seal are composed in one body of the machine. The whole process is automatic.
2.The machine can also be used in hot filling if being installed with temperature controlling device. The handle of the machine can be freely and conveniently turned to adjust the machine to fill various types of bottles.
3. The filling operation is faster and more stable because the micro pressure filling operation of the new type is adopted. There the output and benefit of the machine is higher than the machines of the same specifications. The advanced OMRON programmed controller (PLC) is adopted to control the machine to run automatically while a transducer is used in the bottle -entering chains to adjust speeds and coordinated with the transducer of the main machine to make the operations of moving bottle forward steadily and reliably.
4. It is convenient to operate with higher automation because every part of the machine is inspected to run with photo electricity, On the bases, the filling parts of the machine can be changed into filling methods of lower vacuum.
|Water for flushing: T||3||2.5||2||1.5|
|Water pressure of flushing bottle||0.3MPa|
|Flask / filling / caps||40/40/12||32/32/10||24/24/8||18/18/6|
|Filling pump flow: T||12||10||7||5|
|Filling height||±2MM(liquid level）|
|flush water pump||0.75KW|
|bleed pressure||0.4 MPa|
|Suitable bottle shape||diameter55-85mm，Bottle height150-280mm|
You can also customize the size you need.